Archive
Introducing the Vaughn Velocity VE8 Goalie Line
New to February 2018, Vaughn will be releasing their latest line of Vaughn Velocity VE8 goalie equipment. The custom made pro carbon products are handmade in London, Ontario and Oxford Michigan. We have seen their operation in person, and can safely say that each piece of VE8 goalie equipment is handcrafted with care to achieve pro spec quality– creating the highest performing goalie gear on the market today. Here are some of the highlights and improvements:
VAUGHN VELOCITY VE8 CARBON PRO LEG PADS
- Single break outside roll
- Full pro core internal padding
- Stiffer ankle break area
- Wide knee with knee strap that has two attachment position options
- Center calf strap with wider adjustment area
- Thin profile outer side panel
- New magnetic buckle quick attach system
- Adjustable skate strap position
- Full Carbon fiber reinforced front surface
- Solid inside knee drive block
- Smooth inside edge for easy movement on ice
- Lower profile outside roll
- Thin front face cushion foam for more puck action
- New graphic with visually disruptive graphic
- New design top thigh rise creates more blocking surface
- Large inside landing area for greater balance and precise movements
- Full 11″ width
VAUGHN VELOCITY VE8 CARBON PRO CATCHER
- Two piece cuff thumb design for active glove feel
- Carbon fiber palm and back thumb
- Large wide span T-web with new spilt VE8 design
- Pre-formed palm flex area
- Carbon fiber front palm/back thumb segments
- Offset t-web creates deeper pocket
- Full grip interior palm surface
- Dual pull wrist strap for greater glove control
- Pro-Spec construction with reinforced perimeter edges
- Adjustable inner hand padding for precise fit
- 45” max perimeter size
- Padded wrist strap
- Light weight
- Full grip interior palm surface
- Hand security strap across fingers
- Heat moldable for custom fit and quick break-in
- Internal finger grip rail
VAUGHN VELOCITY VE8 PRO CARBON XP CATCHER
- Full grip interior palm surface
- Hand security strap across fingers
- Solid thumb/cuff design with more open front surface
- Adjustable inner hand padding for precise fit
- 45” max perimeter size
- Padded wrist strap lined with Neoprene
- Light weight
- VAS high impact foam padding in palm and thumb base locations
- Floating cuff design allows glove to be held at a more acute angle to the arm.
- Heat moldable for custom fit and quick break-in
VAUGHN VELOCITY VE8 CARBON PRO BLOCKER
- Full coverage formed finger protectors
- Higher hand position
- Four palm attachment tabs for increased glove control
- Back hand internal cushion padding
- Tapered side profile
- Fitted palm for control and grip
- Full Pro spec construction
- Double layered side index finger guards
- Carbon reinforced front and side shield
- Large side shield with HD ridge on inner edge
- Full coverage formed finger protectors with 3mm thick carbon fiber
- Higher hand position
- Laced down front face for superior puck control and deflection for greater durability
- Full adjustable wrist strap
- Tapered side profile for board shape
- Palm with VX suede and grip overlay construction
- Full Pro spec construction
- Dual layered side index finger guards with carbon fiber insert
Product Review: Superfeet Carbon Pro Hockey Insoles
The Superfeet Carbon Pro Hockey insoles provide up to 11% better acceleration on the ice, unrivaled edge control and exceptional energy transfer. Designed for tight turns, crossovers, quick starts and hard stops, these Superfeet footbeds are a game changer on the ice.
Here are some of the highlights and benefits of Superfeet:
- On-Ice Benefits: The plastic Flybridge reinforcement through the heel and mid-foot loads and channels energy when the skater puts pressure on the bottom of his/her foot. This energy transfer is much smoother with a reinforced insole and creates an 11% improvement in acceleration on the ice. The carbon fiber in the heel of the Flybridge also creates added stability and improves the attack angle for the skater- which allows for quick starts, crisp stops and tight turns.
- Medical Benefits: The added support and stability that the Superfeet insole provides has contributed to health benefits in the feet, ankles, knees, back and spine. The improved stability in the footbed aligns the ankles and knees of the skater, which in turn takes stress off of other parts of the body including the knees, back and spine. We have also seen huge benefits for individuals with foot problems as well, including plantar fasciitis, high arch, low arch, flat feet, etc. The support provided takes tremendous stress off of the skaters foot in these situations.
- Equipment Benefits: The venting system in the Superfeet insoles improves air circulation and drainage, which helps the hockey skate boot from breaking down and diminishes the accumulation of rust on a players steel through normal wear-and-tear. The footbeds also reduce friction between the foot and the boot because the footbed secures the players foot in a more stable position, in turn reducing pressure and wear-and-tear on the skate.
All in all, the Superfeet Carbon Pro Hockey insoles provide an incredible improvement over the flimsy footbeds that come in the majority of hockey skates on the market today. Typical footbeds consist of not much more than a single layer of foam padding, with no structural support. These insoles help improve on-ice performance, medical ailments and equipment issues.
For a limited time you can get the ultimate hockey skate upgrade and get a great price! From November 9-30 you can get the Carbon Pro Hockey Footbeds for 20% Off our regular price!
Introducing the Vaughn SLR Leg Pad Family!
In early 2017 Vaughn Custom Sports launched the new Ventus SLR Pro Carbon leg pads. These pro pads were a significant departure from what many considered the classic “Vaughn” pad. Here are the highlights-
The Vaughn Ventus SLR Pro Carbon leg pad is one of the lightest, most durable pads on the market today. Here are some of the highlights:
- The foam core internal structure is pre-shaped in an “S” curve with carbon fiber inserts. The carbon fiber increases durability, decreases weight, and helps the pad maintain its structure, so there is no change to the pad shape over time.
- The new strapping system replaces all the leather straps to reduce the weight of the pad even further, and also provides an easier strapping set up. The boot strap is a combination of leather and elastic for added durability. There is also a magnetic buckle that attaches around the knee, which allows for a quick and easy way to put on the pad, all while reducing the overall weight of the pad.
- The reinforced HD foam padding along the edge of the pad allows the pad to sit flush along the ice for an extremely tight seal.
- The widened knee cradle allows for added room and flexibility for any goaltender who uses large knee pads.
Following up on the SLR Pro Carbon, Vaughn recently introduced the SLR concept in Youth, Junior, and Senior pad models! All feature the pre-shaped “S” curve, simplified strapping system and lightweight design of the Pro Carbon but at sizes and prices for goalies of any age or ability! Check out of full selection of Vaughn SLR goalie leg pads!