FEATURED PRODUCTS
-
Details
- TOVI/Raven Partnered Design
- Patented DiamondAire Blade
- 100% Solid Carbon Fiber
- Aerodynamic CrossBeam Construction
- Micro-Grip Blade Texture
- DiamondCoat Liquid Tape
- Tactile Grip
- 90 Day Warranty
-
Details
- Construction: AeroCell Base for Cushioning and Energy Return
- Moisture Management: Perforations for Moisture Management and Airflow
- Performance: Anatomically Placed Arch Support for Proper Alignment; Silicone SmartGrip Minimizes In-Skate Movement; Metatarsal Support Reduces Pressure; Cupped Heel Helps Balance and Stability
- Material: AeroCell Base
- Fit A: low-to-flat arches and high pronation
- Fit B: medium arch height and minimal pronation
- Fit C: high arches and forefoot pressure
-
Details
- CONTOURED SUPERFEET SHAPE: Stabilizes feet, minimizing friction, blisters and hot spots
- DURABLE CONSTRUCTION: Superfeet insoles keep their shape, delivering reliable support and comfort for up to 12 months or 200 hours of ice time, whichever comes first
- VENTING SYSTEM: The vent holes line up with the perforations in most hockey skates improve air circulation and breathability
- MOISTUREWICK: With long-lasting odor control
- EVOLYTE CARBON FIBER STABILIZER CAP: Responds to compression, springing back to its original shape
- THIN, HEEL-TO-TOE PROFILE: Designed specifically for skates, the elevated heel increases the surface area in contact between your foot and the skate midsole
- FLYBRIDGE™: Loads and channels energy and absorbs vibration for quick starts, crisp stops & tighter turns
-
Details
- Cuff & Thumb: LITECORE – Lightweight injection molded one-piece design
- Break Angle: 591
- Closure: Update design and palm stiffness
- Palm: Game Ready, 3DO Protection
- Strapping: Cross Form Strap – Secures the back of the hand via multiple attachment points
- Finger Area: Form Fit with pinky and index finger fit system
- Pocket: Double Straight Tee: Optimal puck absorption
- Inner Palm: Suregrip palm
- Backhand Guard: New segmented design for easier opening and closing
-
Details
- Cuff / Thumb: LITECORE™ – Lightweight injection-molded one-piece cuff design.
- Break Angle: New 591 – Based off the reliable 590 angle and shape, but redesigned for enhanced closure, feel and responsiveness.
- Palm Stiffness: Game-Ready Fit + D3O® Protection – Easy break-in with added high impact protection.
- Strapping: Cross Form Strap – Secures the back of the hand via multiple attachment points for greater responsiveness while allowing for greater wrist mobility.
- Finger Area: Form Fit – Designed for customized feel and optimal responsiveness.
- Cuff: FLEXMOTION 2 – Strategic flex points and layered protection for greater range of motion.
- Pocket: Double Straight Tee – Better puck absorption and tracking.
- Backhand Guard: Molded Flexmotion 2 Backhand – Strategic tri-fl ex design and high impact protection.
- Palm and Liner: Dura Palm with Polygiene & Odor Crunch – Featuring Ax Suede with Suregrip for enhanced feel, comfort and responsiveness, with added odor management.
-
Details
- Easy flex design specifically for smaller age group
- Easy strap system with quick Velcro® attachment on leg and knee areas
- Cushion padding on inside landing areas of knee and calf
- Pre-shaped for easy break-in
- Full outer knee and calf protection
- Pads marked left and right
- Full pro look with V10 graphics
- Lower skate control Velcro® and elastic strap
- Double layer inner knee cradle padding
- Split top outside roll provides added flexibility
- Built in pad curve helps close off the five-hole area
- Pad width 9″
- Colors: White/Black only
-
Details
- Firm front surface gives more active rebound
- Quick-slide material on inner pad edge
- Bottom trim with quick slide material
- Wide inner leg cradle with wider shape
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Inner knee cradle pad is adjustable
- Two-way adjustable knee cradle strap
- Wider inner knee landing surface
- Three knee roll design
- Inner core with rebound active design
- Scoop bend with easier flex
- Outer knee cradle pad is adjustable or removable
- Reinforced instep over skate
- Flat profile instep for quicker pad rotation
-
Details
- Firm internal core with HD side rails for greater pad stability
- Quick-slide material on inner pad edge
- Easy flex lower scoop design
- Bottom trim with quick slide material
- Integrated knee landing pad attached to inner core for immediate pad response
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center for quick pad rotation and control
- Wide inner knee landing surface
- Three knee roll design with flat knee rolls
- Pad shape maximizes full width top to bottom full 11″ width
- Outer knee cradle pad is adjustable or removable
- Reinforced instep with flat profile to facilitate skate movement during pad rotation
-
Details
- Firm internal core with HD side rails for greater pad stability
- Quick-slide material on inner pad edge
- Easy flex lower scoop design
- Bottom trim with quick slide material
- Integrated knee landing pad attached to inner core for immediate pad response
- Extended back leg coverage
- Lower profile outside roll with single break style
- Plus 2″ thigh rise with square shaped inside edge
- Thinner outside panel profile for less bulk
- Pre-curved shape for precise shape
- Two-way adjustable knee cradle strap
- Knee cradle center for quick
pad rotation and control - Wide inner knee landing surface
- Three knee roll design with flat knee rolls
- Pad shape maximizes full width top to bottom full 11″ width
- Outer knee cradle pad is adjustable or removable
- Reinforced instep with flat profile to facilitate skate movement during pad rotation
PreviousNext
ON SALE
-
Details
- Anatomical design
- Length adjustable forearm strap
- JDP elbow cap and molded EVA foam cover
- Floating bicep with reinforced bicep guard
- Two-piece flex motion construction
-
Details
- Anatomical shield design for a better overall fit
- Internal and external belt for a snug fit
- Floating spine protector with D30 material in the tailbone
- PE plastic cap on the thigh with PE foam
- Pro cut premium 200D Nylon shell with reinforcement
-
Details
- Constructed with pro quality mesh with lightweight polyester.
- Laminated liner with PU Cushion foam.
- PE Foam and PE inserts for fingers and backhand protection.
- Short Pre-angled one-piece Open Cuff to optimize wrist movement.
- Pro Flex Thumb for better mobility.
- Sensalast Palm with Sublimated Reinforcement.
-
Details
- CONSTRUCTION: Lightweight Polyester
- LINER: Liner with PU cushion foam for a soft feel.
- FINGERS/BACKHAND: PE foam with PE inserts on the back of the hand. Offers a lightweight construction with a great level of protection.
- THUMB: Regular PE foam to protect the thumb.
- PALM: Soft Nash Palm with reinforcement for a great soft feel and durability.
-
Details
- Spine: Vent Armour Foam
- Kidney: One-Piece with Flex Forward Break
- Hip: Classic Fit one-piece Hip Guard
- Thigh Guard: Molded PE and HD Foam
- Belt: Wrap around Belt with Quick Cinch Buckle
- Adjustability: Extension fit +1″ zipper
-
Details
- Classic fit for good overall coverage
- Pro level 8400 Nylon shell for a lightweight feel
- Independant spine with Vent Armor foam
- Thermo Max+ liner for moisture-wicking comfort
- 1 inch extension
-
Details
- Molded HD foam
- Split thigh pads
- High-density foam padding with poly inserts
- Abrasion-resistant hip and leg overlays
- Padded belt
- Skate Lace closures
- Molded dome hip guard
- Segmented kidney pads
- Segmented hip flex zones
- Dynamic flex zones
- Ventilated back panels
- Stretch leg gussets with zippers
- THERMO MAX liner
- Removable thigh guard for logo embroidery
-
Details
- New Upgrades: Nanolite Shield, ACUFEEL 3 Soft Blade with Helicoid Technology
- Kick Point: Mid
- Taper Technology: Skeleton+
- Shaft Construction: Nanolite Shield
- Blade Construction: ACUFEEL 3 with Helicoid Technology
- Shaft Shape: Traditional “T” Shape and Variable “V” Shape
- Weight: 380g
-
Details
- High-Kick point with a soft mid-section creating longer loading periods to store maximize energy.
- Nanolite Carbon Layering in the shaft to reduce weight without sacrificing durability.
- All-New V-Shape shaft geometry for a better feel.
- Sigma STP Carbon to improve durability and balance.
- ACUFEEL 2 Blade with Peel Ply for optimal durability.
- Skeleton+ Taper Technology for better reliability in key moments of the game.
PreviousNext
Location: 
Phone: 
Email: info@sportsetc.net