-
Details
- Hand: Regular
- Blocker Face: 595 Degree
- Material: Nash
- Position: Centered
- Index Protection: Straight
- Hand Fit: Tight
- Cuff: Half Piece
- Silver True Text
- Domestically Made in Canada
- 2022 Model
- In stock- 1 Available
-
Details
- Hand: Regular
- Cuff/Thumb: 590 Degree- 1 Piece
- Protection: Game Ready
- Strap: Webbing
- Tee Pocket: Double
- Palm Materials: Suregrip
- Silver True Text
- Domestically Made in Canada
- 2022 Model
- In stock- 1 Available
-
Details
- Lefevre 595 blocking face with bindingless design
- High-Density foam construction throughout for pro level protection
- Centered hand positioning for a balanced feel
- Half-Piece Cuff design for increased wrist mobility
-
Details
- Made domestically in the USA
- New wider and deeper T-web design
- One-piece cuff and thumb
- Easy close design with deep pocket area
- Kevlar® padding on inner palm padding for greater protection
- VAS Shock Shield palm and thumb base padding reduces hand stingers
- Carbon molded palm and front thumb insert
- Deeper back thumb profile for added hand comfort
- Double layer reinforced finger perimeter edge
- Pure composite in palm 40% lighter than plastic
- Hex mesh inner lining for faster drying
- HD foam in back pad over fingers
- Finger tip deflecting rail with HD foams
- Carbon reinforced T-top for greater web stability
- Inner hand strap for retention and control
- Cuff with no binding maximizes blocking surface
- 45″ perimeter size
- 60 degree angle palm break with easy flex design
- Mesh finger stalls for comfort and heat dispersal
- Added padding in wrist strap for increased comfort
- Heat moldable for precise fit
-
Details
- VAS Shock Shield palm and thumb base padding
- Carbon molded palm and front thumb insert
- New more Defined break point for easy closing
- Reinforced finger perimeter edge
- New Pure composite used for increased performance
- Two-piece cuff and front design
- Hex mesh inner lining for faster drying
- HD foam in back pad over fingers
- Finger tip deflecting rail with HD foams
- True Pro Spec construction
- Carbon reinforced T-top
- Carbon back thumb mold for added support
- Inner hand strap for retention and control
- Cuff with no binding maximizes blocking surface
- 45″ perimeter size
- Mesh finger stalls for comfort and heat dispersal
- Neoprene inner hand control
- Four section back hand padding for flexibility
- Internal grip rail on inside palm for more closing grip
- Full wrist strap allows tighter adjustment
- Added padding in wrist strap for increased comfort
- Heat moldable for precise fit
-
Details
- New V7 graphic with split front face for more color options
- Solid inside knee drive block
- Flatter style inner instep
- Firm boot flex for higher stance
- Solid top outside roll
- Thin front face cushion foam
- Elastic adjustable leg cradle strap
- HD foam insert over outer ankle
- Quick replaceable leg straps
- 11″ pro width
- Lightweight design and construction
- Single break outside roll
- Full pro core internal padding
- Extended length inside knee cradle
- Carbon fiber front reinforcement
- Wide knee and leg cradle
- Large coverage calf padding
- Thin profile outer side panel
- Higher scoop angle
- New higher skate strap position
- Thigh guard with knee cap
- Pre-shape side profile for superior fit
- Internal foam pro core padding provides for durability and consistent rebound performance
- Over-squared inner thigh rise for improved five-hole coverage
-
Details
- FLEX PROFILE: Outer Single Break + Pre-Curved Single Break Core. Maximizes flexibility while helping to close the 5-hole.
- PAD FACE: CONTROL Rebound Technology + CONTROL Knee Rolls. Keep pucks controlled in tight. Molded and minimized knee rolls enhance rebound predictability.
- CORE CONSTRUCTION: DUAL1TECORE Technology + Molded Pro Core. Lightweight dual flex profile for quicker transition into butterfly.
- BOOT: Deep 90-Degree with Torsional Flex and Bungee Toe String System. Enhanced connectivity and flexibility for power pushes.
- BOOT CHANNEL: Deep Soft. Added mobility and feel between the skate and pad.
- LEG CHANNEL/ STRAPPING: Deep, Tight Fit with QMSS. Responsive feel for optimal reactivity and connection with the leg.
- KNEE CRADLE: Recessed Foam with Removable Knee Cradle Wrap. Deeper knee cradle helps close the 5-hole.
- KNEE RAISER / LANDING ZONE: 3D Grip/Injection-Molded EPP Foam with Raised Inner Edge Stabilizer. Excellent pad seal and stability with maximum impact absorption.
-
Details
New Features-
- Speed Skin– CCM’s proprietary synthetic material increases the slide and glide on the pads and allows for greater power pushes
- Optimized Weight Distribution (OWD) Core– A slimmer thigh rise and the center of mass located below the knee makes this the lightest, most balance E-Flex pad ever
- QK5 Strapping– Optimized to allow greater velocity closing the 5-hole while allowing maximum rotation in the leg channel
-
OUTER FLEXThe outer flex of the pad is a single break, allowing for maximum flexibility.
-
INNER FLEXThe pad’s inner flex is pre-curved with a single-break core. Close that 5-hole with ease!
-
BOOT FLEXThe Extreme Flex III leg pad’s boot flex is 90 degrees with torsional flex.
-
BOOT CHANNELThe deep, ultra soft boot channel allows for more freedom of movement.
-
LEG CHANNEL/CALF STRAP OPTIONFeaturing a tight fit one-calf strap, the Extreme Flex III leg channel/calf strap option is lightweight with a closer feel to the leg for better control.
-
KNEE STRAP SYSTEMCustomize your fit at or below the knee with a single adjustable knee strap system.
-
KNEE CRADLEDeeper than its predecessor, the removable knee cradle wrap with recessed foam plays a big role in closing your 5-hole.
-
COREThe new lightweight, thin-molded foam core offers exceptional weight balance for a quicker transition into butterfly.
-
KNEE RAISERA 3D injection molded EPP foam helps seal the pad to the ice.
-
Details
- BOARD PROFILE – SQUARED
- STRAPPING – BOA SYSTEM
- FINGERS – FIXED
- CUFF – LOW & OPEN
- HAND POSITION – NEUTRAL
-
Details
- HEX-AIR: The floating wrist pad features HEX-AIR for increased comfort and air flow.
- DIGITECH PALM
- E-FOAM TECHNOLOGY: Lightweight foam used throughout pro products.
- SINGLE T
- 40° LACED IN BREAK ANGLE: Laced in Break ensures a consistent break point.
- TRUE 1 PC CUFF
- ELASTIC THUMB STRAP: Elastic thumb strap works with the back hand to create a superior snap closure.
- BOA SYSTEM: BACK-HAND: Tension keeps the hand secure over the break of the glove.
- BOA SYSTEM: WRIST: Tension secures wrist pad as tight as desired without straps hanging sloppy out of the glove. The floating wrist pad ensures movement and wrist flex is fully attainable.
-
Details
- PAD FACE – FLAT / LACELESS
- OUTER ROLL – ANGLED
- TOE TAPER – 84°
- SLIDING EDGE – OPTI-SLIDE (PRIMO)
- CALF STRAPPING – GNETIK V CALF WRAP
- KNEE STRAPPING – DUAL OPTION KNEE STRAP
- KNEE FLARE – REMOVABLE
- INTERNAL STRAPPING – OPTIONAL UPPER CALF STRAP
- PRO 2 KNEE PAD COMPATIBILITY – INTEGRATED OR INDEPENDENT
- TOE STRAPPING – SMART CORD
- BOOT STRAPPING – SMART BOOT
-
Details
- External Material: JenPro: Material is highly valued for its resilience to abrasion, guaranteeing durability and strength across a range of circumstances.
- True Diamond Glide: New and improved weave-like material on the inside of the pad is designed to improve the pads slide-ability, it promises to help goalies get across crease faster.
- Internal Construction: Single Break- below the knee. This innovative design allows for quick movements, precise positioning, and lightning-fast reactions. It is also stiffer due to the reinforced composite thigh rise for tight butterfly and RVH seal.
- Pad Break: Stiff- no outer roll break. Enhances overall stiffness with less pre-curve.
- Boot Angle & Toe Taper: Elevated pad on the skate allow for easier pad rotation and greater post coverage thanks to the stiffer, more open boot angle. This design change uses an intentionally wider and reinforced boot angle to encourage a higher positioning of the pad. This alteration guarantees optimal coverage of the goalpost area in addition to improving mobility and agility.
- Calf Guard: The Fast Response System (FRS), located on the calf, features a dual internal adjustable strap for stability, weight distribution, and enhanced comfort, which optimizes agility and responsiveness providing precise control and support.
- Strapping: FRS strapping system- uses dual internal straps and the hybrid pro laces allow for a firm anchor and no additional stretch when pushing away from post out of the RVH position.
Location: 
Phone: 
Email: info@sportsetc.net